Ships Fully Assembled
Handcrafted in Maine, USA
Eco-Friendly Packaging
Made with Domestic Hardwoods
About Our Black Oak Furniture
Our Black Oak furniture starts with the same solid, domestically sourced White Oak we use across our collection. We hand-apply two coats of a water-based black stain, then seal and buff each piece with a beeswax and carnauba paste wax. Black Oak vanities get a water-resistant hardwax oil over the stain instead. The result is a deep, inky black that still shows the grain of every plank.
For years we finished every piece in clear oil, and Black Oak is our first stained finish. We chose a low-VOC, water-based stain from General Finishes for its true black color, and we top it with a food-safe beeswax and carnauba wax.
The Krovel Furniture Co. wood shop was born from a desire to create simple, beautiful, and affordable furniture. We strive to select the finest materials, and we mill, fabricate, and finish each piece in-house.
All of our furniture pieces share a construction method that reveals a "waterfall": a continuous woodgrain that flows down the top and sides. Each piece becomes a one-of-a-kind creation, distinct from monochrome mass-produced items. Every build is hand-finished to show off the character of each plank, whether in the natural tones of our oiled hardwoods or through the deep black of our Black Oak.
FAQs
I'm unsure about size, what do I do?
We always recommend that our clients make a simple mock-up in cardboard and tape in place to the wall. This will give you a very good idea of size and scale in your space.
Do you offer custom sizes?
Yes! We’re happy to build a size that works for you. Contact us with your dimensions and wood choice for a quote.
Can I choose to add my own drawer hardware?
Yes. When adding the item to your cart, you may choose to add our standard finger-hole or “no hole” for DIY hardware.
All measurements are exterior dimensions - what are the interior dimensions?
Finished wood thickness is 5/8” so the interior width and height is 1.25” less than exterior dimensions. The solid back with the integrated mounting cleat is 1/2” with a 3/4” cleat for a total interior depth of less 1.25”. for our Media and Storage cabinets with sliding doors, subtract another 3/4” for the doors, total is less 2” for back and doors combined. Contact us if you have questions






